Drivetrain Vibration

jakuzzie said

Would it be wise to buy a complete balanced stroker kit? It is already bored to the max..

Click to expand...

Good; as it takes the idiot factor out of the equation at the machine shop, Fast; as it arrived at the shop in a couple weeks. I waited longer to procure the cam than the stroker kit.... NOT CHEAP; Having the over bore re-sleeved penciled out better than customizing pistons and rings however. Went with the smaller SCAT rotating assembly with the 3.58 stroke. I kinda dig my little 373.

keep us posted on the vibration. I chased one years ahead of the above mentioned rebuild. The pinon angle adjustment, making sure that the bearing cups were centered in the yoke with bolts tightened to spec, and an old fashioned counter balance on the end of the tranny helped my case the most.

good luck!