Spot Welds
With the HF hole saw I found the spring-loaded pin wouldn't keep the darn thing from walking off the work. I wasted one cutter side PDQ, chipping off all the teeth. Went to pilot drilling 5 or 6 spots, then hit 'em with the cutter, and it was slow going. Started using the cutting fluid and it made a world of difference for me. I recall running the drill speed fairly quick though.
Front lower corner of inner fender. IIRC, had to use an extension next to the frame rail spots....
With the HF hole saw I found the spring-loaded pin wouldn't keep the darn thing from walking off the work. I wasted one cutter side PDQ, chipping off all the teeth. Went to pilot drilling 5 or 6 spots, then hit 'em with the cutter, and it was slow going. Started using the cutting fluid and it made a world of difference for me. I recall running the drill speed fairly quick though.
Front lower corner of inner fender. IIRC, had to use an extension next to the frame rail spots....
