67 twin turbo dart

racerjoe said

You shouldn't hear coils clicking. That's likely the coil output finding a path to ground. When I did my initial test, I had the plugs removed and put a ground jumper to the body of the plug. That way I could see the strength of the spark. It was also neat to see how adjusting the dwell changed the spark intensity.

Click to expand...

Oh well I didn't know, still and always learning lol i just did yhe click test for a sec just to make sure the signal was going to the right one, just double checking my wiring. when I tested the coils with the plug and wire I used the same for each test so that way I can eliminate gap difference per plug, and the wires all ohm'd from 27-28.