just need a quick confirmation on my idiocy
Distributor drive slot needs to point to front intake manifold bolt on driver's side.
#1 cylinder up on compression stroke, TDC.
Take a big flat blade screw driver and turn the drive gear clockwise while lifting up. Go a little past then drop it in till it lines up with the front intake bolt.
Distributor drive slot needs to point to front intake manifold bolt on driver's side.
#1 cylinder up on compression stroke, TDC.
Take a big flat blade screw driver and turn the drive gear clockwise while lifting up. Go a little past then drop it in till it lines up with the front intake bolt.
