next project...rear plow
got the truck back today and started pulling things off
the bumper and the hitch are now on the side yard
i took a good look at the plow frame and it looks like it can not slide flush on the truck frame because of the shock mounts
long story short, it will portrude of the truck frame by about 3/4s of an inch
not a big deal but it meant i couldnt copy the plow frame holes onto the truck frame, so i swapped it around and put the stock bumper mount holes on the plow frame
by then, i had lost all daylite so i wont know for sure untill tomorrow if it fits, but i got high hopes it will slide right in
best part of this set up is, the stock bumper mounting bolts were pressed into a plate together so they only take one socket to torque down
got the truck back today and started pulling things off
the bumper and the hitch are now on the side yard
i took a good look at the plow frame and it looks like it can not slide flush on the truck frame because of the shock mounts
long story short, it will portrude of the truck frame by about 3/4s of an inch
not a big deal but it meant i couldnt copy the plow frame holes onto the truck frame, so i swapped it around and put the stock bumper mount holes on the plow frame
by then, i had lost all daylite so i wont know for sure untill tomorrow if it fits, but i got high hopes it will slide right in
best part of this set up is, the stock bumper mounting bolts were pressed into a plate together so they only take one socket to torque down
