Dads 67 "S"capade
Slow go as usual, but was able to get inner whiskers installed. Mounts and slotted holes didnt line up with those either. I enlarged the slots, thankfully a good amount of metal there to work with.
While in there, I lubed the heck outta the regulator and added anti rattle tape where it was missing. I "adjusted" the regulator....boy that novelty wears off quick! Also verified all the electrical in her arse end works... defrost,stop/turn/signal/4ways and reverse lights. With the reverse light housings, they didnt mount snug as the mount screws just mount into rear valance and were sloppy, shitty design. I bought some clips/speed nuts from hardware store. A pain in the *** to install, but in and snug. Basically a 2 person job. Should have put new bulbs in..:BangHead:
Still have to put the interior panel in and fine tune brake switch.
Slow go as usual, but was able to get inner whiskers installed. Mounts and slotted holes didnt line up with those either. I enlarged the slots, thankfully a good amount of metal there to work with.
While in there, I lubed the heck outta the regulator and added anti rattle tape where it was missing. I "adjusted" the regulator....boy that novelty wears off quick! Also verified all the electrical in her arse end works... defrost,stop/turn/signal/4ways and reverse lights. With the reverse light housings, they didnt mount snug as the mount screws just mount into rear valance and were sloppy, shitty design. I bought some clips/speed nuts from hardware store. A pain in the *** to install, but in and snug. Basically a 2 person job. Should have put new bulbs in..:BangHead:
Still have to put the interior panel in and fine tune brake switch.
