1972 Dodge Colt
Valves adjusted.
Pressure Tested.
Compression test was real good, over 200 in each cylinder, 210 best.
And with a valve cover I get the same numbers!!!!
Built a brace for the grill to the radiator yoke.
Worked a little on little on the AVS.
There are supposed to be adjustment screws in the base covered with lead plugs.
If they are in my carb I drilled and never saw a screw.
Perhaps the PO had screwed that up, seemed like I was drilling steel, not lead.
Calibrated a fuel measuring plastic pipe. 5 Gallons of 102 in the tank.
Valves adjusted.
Pressure Tested.
Compression test was real good, over 200 in each cylinder, 210 best.
And with a valve cover I get the same numbers!!!!
Built a brace for the grill to the radiator yoke.
Worked a little on little on the AVS.
There are supposed to be adjustment screws in the base covered with lead plugs.
If they are in my carb I drilled and never saw a screw.
Perhaps the PO had screwed that up, seemed like I was drilling steel, not lead.
Calibrated a fuel measuring plastic pipe. 5 Gallons of 102 in the tank.
