What pistol grip shifter to buy for a 1965 Barracuda?
OK, I did it today. I threaded the 3/8” holes I drilled in the adapter. The holes on the shifter aligned well, but I got the holes on the handle side off by about 1/32”, so the 3/8” bolt did not line up properly. So I used a 5/16” bolt and nut on one of these holes. I will replace it with a grade 8 5/16” bolt before trying to drive it, so I can torque it down tightly. FYI, this is the 1970 and up B body long shifter.
OK, I did it today. I threaded the 3/8” holes I drilled in the adapter. The holes on the shifter aligned well, but I got the holes on the handle side off by about 1/32”, so the 3/8” bolt did not line up properly. So I used a 5/16” bolt and nut on one of these holes. I will replace it with a grade 8 5/16” bolt before trying to drive it, so I can torque it down tightly. FYI, this is the 1970 and up B body long shifter.
