Mixed up my 273 rocker arms. Are they different?

-
Wally-T

Wally-T

64 Signet
Joined
Jul 14, 2019
Messages
151
Reaction score
50
Location
Cochrane Alberta
Hi again folks.
I removed the rocker arms from the shafts to clean the shafts out and mixed up the order on one side @#*&^%.
So are the exhaust and intake different? If so how do I know what is which haha. Any help would be greatly appreciated.
Thanks, Wally.
 
Which rocker do you have?
 
I don't believe there is a difference between the I & E on cast adjustable 273's. The stamped hydraulic ones are different for sure though.
 
RustyRatRod said:
That tells me all I need to know. They are all the same.
Click to expand...
Thank you. All have 308 stamped on one side and a W with mixed numbers on the other e.g W15, W4, W13 etc. So I thought I might be in for a bit of a bad day tomorrow lol.
You've made my night :lol:
 
Wally-T said:
Thank you. All have 308 stamped on one side and a W with mixed numbers on the other e.g W15, W4, W13 etc. So I thought I might be in for a bit of a bad day tomorrow lol.
You've made my night :lol:
Click to expand...
Naw, you're good. Were they hydraulic rockers, then you have a right and left offset for pushrod dimples, but all those you have are the same.
 
You must log in or register to reply here.
-

Back
Top