Hello to all a newbie from germany needs help
Looks like the original shock towers were cut off so you could either remove whats left and start new or cut the replacement tower to fit. Make a pair of templates based on the uncut towers.If you're going to use the inner fenders from the scamp it would be easier to separate them from the shock tower/frame rail using a 3/8" Double Sided Rotary Spot Weld Cutter Remover Drill Bits, some use a mini sander.
Lenox Tools 1972920 METALMAX Diamond Edge Cutoff Wheel is the best bang for the buck.
As far as welding someone can chime in.
Engine side of the frame rail.
Looks like the original shock towers were cut off so you could either remove whats left and start new or cut the replacement tower to fit. Make a pair of templates based on the uncut towers.If you're going to use the inner fenders from the scamp it would be easier to separate them from the shock tower/frame rail using a 3/8" Double Sided Rotary Spot Weld Cutter Remover Drill Bits, some use a mini sander.
Lenox Tools 1972920 METALMAX Diamond Edge Cutoff Wheel is the best bang for the buck.
As far as welding someone can chime in.
Engine side of the frame rail.
