Del is going on a 3000 dollar non-Mopar, non-vehicle, non-boat road trip

Thanks Kim

Well I don't know if I 'needed' it LOL. Spent most the day examining, measuring, figuring, and I've got the subframe pretty well planned out---providing I don't make a big mistake. Plan is to tack it together and TRY it LOL

It's going to have to sit higher than I wanted, which was about a foot. I had to accept raising it to about 18" from the bottom to ground, so the pump will clear the foot rests.

There's a top brace connects through the tower area just under the valve, and connects to the big hinge for the arm. THAT is gonna be trouble, because of the way this tractor is made. There are a couple of big bolt holes into the top of the gearbox casting, I'm thinking "them" for one side, and not quite sure about the other. I think I tend to "over" but at least it's likely not to break anything that way