Peanut Gallery Survey for my /6 Build ...

If you wait a few years, I'm guessing there will be affordable motorized blowers which are an easy mod for more power, much simpler than fabbing a turbo or fitting a supercharger. The slant has restricted intake with intake and exhaust on the same side. There are already such blowers and you can watch youtubes. The <$500 ones don't work, actually restricting flow, but some ~$1000 add power. Eventually there may be complete setups w/ perhaps Li batteries and over-boost protection. Use a carb which works with boost, or better a TBI EFI. The later requires a 4BBL intake (or custom machining). Pishta here added MPFI injectors by custom-machining ports in a slant head. There was a custom MPFI intake manifold made by a small shop, so google if still offering that.

@BillGrissom Thanks for the comments. Just discussed that I may simply opt for a 4BBL carb/manifold route from Clifford Perf as a starting point with a TorqueStorm EFI to baseline what the car drives like, then determine what to do afterwards. Along with engine machining, that might get what I'm looking for, but if not, then I can always open-up the wallet for an ex post upgrade project after I've had some time on the road with the build