score ! roller cam 360 LA

My favorite blocks. Check your 308 heads well over, they like to crack right between the valve seats. Otherwise a great mill to start with outside of going with aluminum heads. Do not get rid of the stock cam. Roller cores are becoming hens teeth lately and I’m not sure if things are getting better. Best bet is to have it reground as others mentioned. The one that I’m looking at building hopefully soon with parts on hand.
91’ roller
hcp116 .030 over pistons
Scat I beams
Heads I have a few options on hand
- 308’s bowls cleaned up gasket matched 1.88 valves
-SM CNC ported 2.02 valves (might save for stroker build)
-915 J heads 1.88 valves bowls cleaned up gasket matched
Stock crank
Cam will be whatever Oregon cams can get out of regrinding my stock cam
Edelbrock Airgap intake
Doug’s ceramic coated headers
3k stall 727 or 2500k stall with 904 (probably go with the 904)