Help identify please.

-
N

nothingbutdarts

Well-Known Member
Joined
Mar 16, 2007
Messages
3,921
Reaction score
754
Location
Bailey, Co.
Looking to purchase this plastic piece on a 69 Dart. It seems to be long gone on the car & I do not know what it would be called.
Thank You!

image000000 - 2022-06-11T081409.929.jpg
 
There are 4 different size ones...they are spacers for interior panels...some cars had thick ones some thin...check your thickness to see what you have
 
Mtrhead said:
There are 4 different size ones...they are spacers for interior panels...some cars had thick ones some thin...check your thickness to see what you have
Click to expand...

What if you have nothing. My '69 GTS has no interior whatsoever. Is there some way to tell what you need or is it best to buy them all and see which one works?
 
Hi all,

I'm Reverse Engineering this small plastic part. Nothingbutdarts sent me the broken plastic retainer he has and I have it 98% complete to 3D print. I do need any photos and dimensions of the rear of a complete part so I can finish this up.

Also, if anyone knows the other thicknesses I can RE those too.


upload_2022-6-17_10-1-21.png



I suspect this is approximately what the tabs look like

upload_2022-6-17_10-10-31.png
 
Interesting! 69 fish in either Coupe or Fastback never had such behind the headliner. Can I assume that is what I am seeing?
 
I have a few of these i think Dana. Working midnights, I'll try to remember and chk in morning
Dana67Dart said:
Hi all,

I'm Reverse Engineering this small plastic part. Nothingbutdarts sent me the broken plastic retainer he has and I have it 98% complete to 3D print. I do need any photos and dimensions of the rear of a complete part so I can finish this up.

Also, if anyone knows the other thicknesses I can RE those too.


View attachment 1715943251


I suspect this is approximately what the tabs look like

View attachment 1715943258
Click to expand...
 
This is the interior trim piece, there is one screw hole at the rear of this panel that the screw screws into the needed plastic spacer.

image000000 - 2022-06-18T082750.683.jpg
 
OEM....
Screenshot_20220624-190345.png


REV B....
PXL_20220625_010537871~2.jpg



Next print will be with a more flexible material.

This material is too brittle. The OEM is just propping up the screw
16561196704514303999507734323569.jpg


Screenshot_20220624-190345.png


PXL_20220625_010537871~2.jpg
 
Last edited:
Oh that's the mounting pads for the rear garnish trim! they snap into the rear dutchman panel.
 
1969383S said:
Oh that's the mounting pads for the rear garnish trim! they snap into the rear dutchman panel
Click to expand...

Yep.

Any idea of a part number? I looked at the 69 parts book but couldn't find the part.
 
You must log in or register to reply here.
-

Back
Top