SRT_DSTRHOLC
Well-Known Member
Hello! I have some measurements, but I am wanting to double check with you guys to see what length driveshafts you have been running (length wise) to see if I’m in the ball park. I always like to double check
Driveshaft length for a Viper tr6060 and 8.75 rear
- Thread starter SRT_DSTRHOLC
- Start date
-
Must be determined after the rest of the driveline is installed and suspension ride height is established. Then you measure.
Dennys Driveshaft How To Measure Correctly for driveshafts that fit right
Dennys Driveshaft How To Measure Correctly for driveshafts that fit right
SRT_DSTRHOLC
Well-Known Member
SRT_DSTRHOLC
Well-Known Member
Again, I understand how it works. Asking for others numbers.
No 2 cars are ever the same when custom built by different people. Yours will be unique. Your engine trans combo maybe mounted further forward or back than the next guy. Different mounts etc...And why would you use someone elses numbers ? Just saying...
SRT_DSTRHOLC
Well-Known Member
Again. I don’t need a full conversation off topic. I get how it works. I just need some numbers. Thank you for your input. Still looking for numbers.
52- 37/64s Cut twice , then measure once !
Last edited:
SRT_DSTRHOLC
Well-Known Member
Thank you! What car? And engine trans? Just confirming
Not sure if your Viper TR6060 has the same overall length as the aftermarket T56 Magnum...
In my Duster with a 340, factory 73+ spool mounts, T56 magnum transmission and a ToddRonn crossmember my driveshaft ended up being 45 3/8" back to my 8 3/4 with 1350 joints.
In my Duster with a 340, factory 73+ spool mounts, T56 magnum transmission and a ToddRonn crossmember my driveshaft ended up being 45 3/8" back to my 8 3/4 with 1350 joints.
Last edited:
SRT_DSTRHOLC
Well-Known Member
Well i got 48 3/8 and 48-1/2 depending on where I took the measurements. So again, I know everything is different, including that I have GST watts link and need to make sure my rear is where I want it too
Again, More details = better answers.
SRT_DSTRHOLC
Well-Known Member
Again.. please stop commenting here. You’re saying things I already know and yet your contribution has been nothing that I’ve asked for.
-
