Electrical connections
I made some connections with yellow butt connectors. I took off the insulation and made a little crosscut in the center to relieve some pressure with my Dremel then a cut perpendicular to that and then massaged it around the little Phillips screwdriver to make it a snug fit with my crimping pliers. A crimp, some shrink tape and now I have a make shift harness. I used my cool new heat gun on the job, much better than a lighter.
I made some connections with yellow butt connectors. I took off the insulation and made a little crosscut in the center to relieve some pressure with my Dremel then a cut perpendicular to that and then massaged it around the little Phillips screwdriver to make it a snug fit with my crimping pliers. A crimp, some shrink tape and now I have a make shift harness. I used my cool new heat gun on the job, much better than a lighter.
