Whose running a clutch fan

Well, just exploring different options.
What is wrong with your current setup?

I am going to have the rad converted to 3 core.
Should not need to if the cooling system is functioning correctly


Running a 180 Stat so as far as out current temps go it’s been averaging 105.

105 outside air temp and a 180 deg thermostat, 200 not an issue unless it keeps raising

Temp gauge runs in the 200 area bot in town and freeway driving.
With 105 deg outside air temp that is normal
I may put a high flow 160 degree stat on to see if it lowers the temps
The thermostat only sets the low temp, the cooling system, outside air temp,air flow and load on the engine dictate the running temp.