Another episode of " Name This Part "

-
RAT ROD AL

RAT ROD AL

MOPAR ARCHAEOLOGIST - one parts hoard at a time!
FABO Gold Member
Joined
Jan 18, 2013
Messages
7,814
Reaction score
10,414
Location
Robbinsville, North Carolina
Hey guys and girls ! I have a couple things I would like to figure out what the heck they are !

First up is
#1
Small Block Mopar Real Race stuff .

Header flanges..
20220629_163658.jpg




Up #2


I know for SB , But I cant find it anywhere one the NET !
20220629_172703.jpg



Up #3
What the heck are these from ?
20220629_170335.jpg




and #4

Maybe from a duster ?
20220629_172452.jpg



Thanks for any and all Help !
 
Last edited:
The bottom header flange look like W2. Not sure about top one.
Cam thrust plate with bearing. Haven't seen those available for a long time.
#4 maybe a seatbelt retractor cover but that's just a guess.
 
It's been a long time so I might not get this 100% right but it goes something like this.... The top & bottom flanges go together... The top flanges bolt to the race head which has the bolt holes relocated to allow head porters to go nuts... The lower flanges bolt to the first set of plates allowing standard headers to be adapted the the race head....
 
1WildRT said:
It's been a long time so I might not get this 100% right but it goes something like this.... The top & bottom flanges go together... The top flanges bolt to the race head which has the bolt holes relocated to allow head porters to go nuts... The lower flanges bolt to the first set of plates allowing standard headers to be adapted the the race head....
Click to expand...
What Mopar Head ? Is W2s - W5s & W9s all the same exhaust holes ?
 
These are covers for the lower fold down seat hinge on a fold down seat Duster/Dart Sport.
20220629_172452-jpg.jpg


Like this...
3B15281362 copy.JPG
 
When I had my hands on W2 stuff there was no W5/W9.. There was three levels of W2 & only the most extreme heads used the plates...
 
Top plates are 4 bolt Hooker header flanges to weld the tubes onto when making headers. You need the adapters for Hooker headers to use them . Once the headers are made you cut them apart

The bottom plates are W2 Hedman header adapters plates that bolt on the head and then your headers bolt to them.

I would be interested in them if the price is right to make patterns out of stainless

Steve 046.JPG
 
Oldmanmopar said:
Top plates are 4 bolt Hooker header flanges to weld the tubes onto when making headers. You need the adapters for Hooker headers to use them . Once the headers are made you cut them apart

The bottom plates are W2 Hedman header adapters plates that bolt on the head and then your headers bolt to them.

I would be interested in them if the price is right to make patterns out of stainless

View attachment 1715949605
Click to expand...
Believe this correct, as years back, had both Hooker & Hedman W-2 headers.

#2 may be a Hamburger torrington cam plate for a small block, and the aluminum spacer may be the spacer used for cam bolt and cupped washer without fuel pump eccentric.
 
You must log in or register to reply here.
-

Back
Top