1968 Dodge Dart hood vents

I would live to see if air goes into the holes at road speed, the cowl is a high pressure zone on a car at speed.

I suspect you will get a ventury effect as the air passes the cutouts and the underhood pressure.


Would love to see some short yarn strings in the slots so if air is going in or out the strings will follow
When I get some testing done, I will post the results. I suspect it will be a venturi effect also, but I will try yarn. These vents on the side will not likely be a high-pressure area. The movement of the strips of paper towels is caused by the fan blowing air back. There was probably a reason MOPAR did not slot these from the factory. Anyway, time will tell.