1964 a833 hard to get into first gear

Slantsix64 said

lol pretty much seeing the throw out bearing against the diaphram nothing looks broken or loose. I think it might be an internal situation because if it gets hard to put into first i can ram into gear but i feel pressure as if the trans is turning a bit if that makes sense.

Click to expand...

Woah the throw outbearing should not be touching the pressure plate fingers. Is it a 3 finger Borg and Beck or a Diaphram type with no coil springs but a lot of small fingers. At rest, there should be a gap for proper adjustment. Also, if you are running a Diaphram type, you need to remove the return spring on the pedal linkage under the dash.