Electrical panel question



MBE24L125B TSMETER CENTER, 125A, 2/4, OH/UG, BR TYPE, 10 KAIC, SURFACE



Maybe you could use something like this. You need to look for panels that are bottom fed for an under ground service. This one doesn’t have many breaker spaces but you can get similar one with more spaces. You would need to put an offset in the conduit coming into the box. Looks like the conduit is threaded coming in and if there is room to move the box up you may be able to use a coupling and a offset nipple to move it over far enough to get it into the box. The wire may need to be extended to reach the lugs in a new meter I’ve had to do before. I don’t know what the electrical code is in your area so you would check with the authority having jurisdiction. I don’t know if you will be able to find a box that will fit the existing hole you have when you take the old one out. If you have a Platt Electric Supply, North Coast Electric or Consolidated Electric Supply in your area the have a lot of options. Home Depot and Lowes a lot of the time don’t have people that will look any further than what is on the shelf but they do have access to a lot of stuff on their websites.