New tool from Summit to prime Gen III oil pump

68cuda408 said
I use a home depot $9 pump sprayer with the nozzle cut off and an 1/8"npt barbed fitting in the end of the hose. Take out the oil sending unit ,screw in the hose , put oil in tank and pump it up, you'll hear the air coming out of the rockers (new builds) and/or hear oil return to the pan. you can remove the unused plug above/below the sender and either do the top or bottom end. I do both, reinstall the sender and plug.and .....done. It can also be used on all mopars.
Click to expand...
How do you check the oil pump to make sure it's good? In my case this tool saved me a lot of labor, because the brand new Melling oil pump was bad and I had to get a different one. It's was nice to know that before put the motor in the car and started it up! Darndest thing I've ever seen. Oil leaking out between the body and back plate of the pump. I don't know what has happened to quality in the country the last couple of years.