Ok i took the intake off today. Sorry i cleaned up the valve train area befor i thought about pictures. It did have some white stuff in it. I pulled some of the plugs & they were dry. A little black because of running rich. I took a straight edge to the intake & heads & they look good. What i did find is the whole in the back of the intake for the alignment pin had an old pin broken off in it. With that being said i would think that i found the problem. With that being in there the intake wouldnt be able to seat down on to the head. What is your guys thoughts ? Here are some pictures. I am hoping that is the problem because i dont want to buy more oil, gaskets & put it together then it not be whats going on.