T56 Crossmember

DionR said

I'm using the Holley mounts which move the motor forward by about 1.75" per my measurements. So I initially thought I was going to have to build my own anyway. But after looking at some of the pictures, it looks like the upper hoop would still work fine and I would only need to rebuild the trans mount. So I plan on buying one, unless they start making them out of unobtanium...

Click to expand...

Yeah if the Holley mounts move things forward then it wouldn't be hard at all, the crossmember hoop should be plenty big enough to clear the transmission. I'd have to look, the only possible snag might be a connector or output for one of the sensors lining up with the crossmember. But that should be easy enough to deal with. You'd just have to figure out how to move the transmission mount, but that shouldn't be that hard.

Now, if it moved the engine back it would be a problem, the hoop probably wouldn't clear the transmission