Race 340 Block Prepared by Steve Wann (Mr. Mopar)

This block was fully Competition Prepared
for Stock/Superstock

It is Decked/ Alignbore Checked and done if needed
Bored with block plated Installed
It is Filled = so it can NOT be used in a street car
It was prepared for me by the legendary Steve Wann.
It has all the modifications and operations that make his
engines the fastest in the Country.

It has been Sonic tested and was the thickest and best
for core shift out of ten blocks tested!!
I have several Standard Bore Virgin 340 Blocks that also sonic tested
well and would be suitable for Street or Strip.
Your Choice $1,250.00 each.
One cylinder was not as good for core shift so it was sleeved
It is honed for Moly rings and is .060 over. and thick enough
to go definitely more over whenever needed.
It is ready to go!
Clean and painted

It had about about 20 to 30 passes on it before I went to a race block when they
became sort of legal.
It is freshly honed again which is a good idea after a few passes and everything
is broken in and takes a final set!
In my stock 340 E/SA (Stock cam/Thermoquad/Compression/Heads it
ran 10.60 @123 MPH at 3350 Lbs. and was one of the fastest 340 cars
in the country.
$1,500.00
Machine work cost way more than that alone!!

If you want a deal + I have a set of Forged Stock Compression Coated
(Calc. 11.8 to 1 with 63cc Heads/.028 gasket)
.060 Pistons and 340 Rods with the Forged balanced lightnened Crankshaft
(needs at least polishing on one journal)
$750.00 Only with the block.

I can supply any needed small parts to finish it.

20220722_144120.jpg

20220722_144128.jpg

20220722_144135.jpg

20220722_144143.jpg

20220722_144153.jpg

20220722_144248.jpg

20220722_144255.jpg

005-image-3.jpg

My Son and I = Two of the Worlds Fastest Stock
340 A Bodys