Ok , I have a couple more things I don't know what they are or for ! All help is appreciated !
#1
#2
Head light bezel from what ?
#1
#2
Head light bezel from what ?
New Episode of " Name These Parts"
- Thread starter RAT ROD AL
- Start date
-
HemiSSDart
Dartus Interuptus
Bezel looks like Aspen or Volare, the rubber could be for a truck utiline fender? I know there are lots of those kinda rubber parts, could be for an older car too...
Found it on LMC Truck 48-53 fender welt Ford truck, $8.95 in stock...LOL
Found it on LMC Truck 48-53 fender welt Ford truck, $8.95 in stock...LOL
Bezel is from 72 to 76 Dodge truck.
doug 371
Well-Known Member
1 looks like lawn edgeing
There are lefts and rights. After having said this, I hope this doesn't send you to the N&P......
Might be a garage door seal?
Definitely a truck bezel, L or R is stamped at the end of the P/N stamped in the rear. The ford truck fender welting looks like it could be a door seal cut to length replacement floor squeegee edge. I’ve always wondered what the part sandwiched between the fender and body of that stuff looked like.
I get all the parts from the guy who stamped the part #s was in the crapper 9 to 5 !
Left , right , front or rear ?
Both
here’s a link to LMC truck just scroll down you’ll see the part numberExterior Rubber
That doesn’t surprise me at all with the state of UAW/ChrCo relations at the time that was manufactured.
I had a 76 4x4 that my wife rolled, so I bought a Little Red Express and swapped the body over . I had a couple different step sides. That one is nice !
I’ve got left side one of them that does have a part number. But IIRC, not all the ones that were in the stack of them had them.
Last edited:
i think the mounts are 63-65 b body.
The top ones do look like 63-65 b body. Can’t see the bottom pic for some reason
-
