Stroker 340>416 Build Advice
For myself, I have several styles of camshafts for specific purposes.
I have this old Crane Hyd. cam for a general bracket engine. It’ll make for a nice hot rod in the street.
This solid Lunati roller for my slightly stroked (372) 6 pack engine.
This SFT Ultradyne cam for my drag engine.
There wide and varied. There all about 20*’s of duration @.050 apart.
Big difference in power band and performance. That first cam card is 236@050 and would work well in your stroker. I’m does have a low lift though. I’d look for more lift on your engine.
The Lunati will have ported heads, 1.6 rockers with a port intake and 1-3/4 headers as well as forged internals. The engine will get some tricks applied to it that won’t get listed. All in all, I’m looking to make a easy mid 11 street car.
The Ultradyne SFT cam will be on a big inch stroker with very well ported heads, TR intake, big headers, high compression & stall converter and big gears. Looking to run 9’s easy. Not 9.99 ET’s. Quicker.
OP, Questions, comments?
For myself, I have several styles of camshafts for specific purposes.
I have this old Crane Hyd. cam for a general bracket engine. It’ll make for a nice hot rod in the street.
This solid Lunati roller for my slightly stroked (372) 6 pack engine.
This SFT Ultradyne cam for my drag engine.
There wide and varied. There all about 20*’s of duration @.050 apart.
Big difference in power band and performance. That first cam card is 236@050 and would work well in your stroker. I’m does have a low lift though. I’d look for more lift on your engine.
The Lunati will have ported heads, 1.6 rockers with a port intake and 1-3/4 headers as well as forged internals. The engine will get some tricks applied to it that won’t get listed. All in all, I’m looking to make a easy mid 11 street car.
The Ultradyne SFT cam will be on a big inch stroker with very well ported heads, TR intake, big headers, high compression & stall converter and big gears. Looking to run 9’s easy. Not 9.99 ET’s. Quicker.
OP, Questions, comments?
