Parking Brake Cable Install

Can someone post a picture of the Parking Brake (PB) cable installation as it extends downward from the firewall? I removed the original PB cable and thought a nice new cable from Right Stuff would be a nice addition since the threaded end of the old cable under the car is buggered up (was cut to accommodate the equalizer tension).

Guess what? Replacement cable has thicker armor and U-connector is off-center connected to pull bracket link. The anchor bolt and nut are also a bear to tighten as clamp does not fit
nicely over the larger diameter armor.

So back to the original OEM cable with a modification at the threaded end but need to know PB cable routing as it extends downward from the firewall.

I know this is a small request but do not want the shifter linkage for the transmission to be blocked by the PB cable. The cable needs to be placed so no interference exists.

Thx. Any help appreciated.