ok here goes, mark the center of the roof from center of windshield and rear window with masking tape put a center mark on tape, fold top in half mark center on under side, place top on roof still folded in half from front to back and line up marks, half of the metal roof should be exposed, spray a 12" wide area front to back on roof and vinyl top, let sit a few minutes till tacky, fold the 1 half of top down on to the glued surface working it out with squeegee, let sit a minute, fold top back up until you see the glue, repeat 12" at a time, then go to the other side and repeat, correct glue is a must, let dry trim excess. hope this helps
