I believe milodon only rates there system at max rpm, like my single line remote with swinging pick up is good for 7500 if I remember correctly. I'll see if I can find some instructions for it when I get off work
But if it’s 80psi at 7500 you can easily have that with any HV pump. My HV pump with stock style 1/2” pickup is between 75 and 80 psi at 7200 (my redline). Out of the box it was going up to 90 so I shortened the return spring a little.
Also if you do the math using numbers shown by engine masters episode, assuming it’s proportional, HV pump should do 6.5gpm and HP 6.4 gpm…
Soon I will post my numbers for your guys.
Now with HV pump I get 25psi in gear at 850 rpm. It’s built loose with pressure fed roller lifters and non bushed lifter bores. We will see if it changes with billet Milodon using stock pump cover.
This should show what’s what.
