Confirm torq. specs.

The torque specs are all in the back section of the service manuals, which you can download free from MyMopar. There are a few specs that are "famously" incorrect, like the smaller rocker bolts on some years. You can double check yourself by figuring out "what bolt" you have AKA 3 point is grade 5 and then looking up a grade 5 bolt torque on the internet. There are charts all over the place.

Some specs are "dry" and some are "oiled" with (usually) a specified weight and type of oil.

As said, I have never in my life torqued an intake. Tighten it a little at a time "cross" and don't get all muscle on it. A "standard" combo wrench does not take much pull to generate the right torque, even at my age (u4)