10 1/2" bellhousing

You're gonna have to make some mods, but yes, you can make it fit. You're probably gonna have to shorten the Z bar at the very least. Why not just use a 10" clutch and pressure plate? The pressure plates are a little hard to find, but still out there and the clutch discs are readily available. Those will both work with the smaller 9.5" flywheel and you will not have to change anything else. The pressure plate part number is CA 1525. It is a scalloped 10" pressure plate that will bolt right onto the 122 tooth slant 6 and 273 flywheels.