RIP 340 Onto Magnum swap

I am already setup for EFI from the 340 and I have a fresh rebuilt 4 speed with OD. Ive already been down the 42RH route. Lol. If he is going to scrap the car, I can cut up the front and use my picker to pull it out as an assembly. Based on your pics.

Sounds like you're half way there already :)

The crank sensor is part of the flexplate, but it's possible to adapt the A833 flywheel to the Magnum EFI flexplate. Have a look at 5:33, if you don't want to watch the whole video: