Stainless, Bushed PRW Rocker Arms
I’d buy them again in a NY second. He’s got oiling issues.
Didn't you say they need banana grooves?
BTW I drove my car for about 2 years with X Heads and factory rockers with no issues.
Before putting Trick Flows on with PRW Rockers.
Some also suggest the oil hole is a bit too small in the Tf's
But really shouldn't matter because I doubled the oiling when I added pushrod oiling.
It was getting plenty of oil.
I think banana grooves would certainly help if not eliminate the problem altogether.
I'm Sorry if I have you mixed up with someone else.
Also I drove my car several thousand miles with the Trickflows and 273 Rockers with Factory Banana grooved Shafts with zero wear, with just through the head oiling.
So there's that too.
My personal Opinion is what you and a lot of knowledgeable people have said all along,
They need Banana grooves and possibly better bushings and roller tips.
Lastly Mike @ b3 said he did not find any bluing or any discoloration to my PRW Rockers or Shafts that would indicate heat like from a lack of oil.