Retro Fit Factory A/C into Original non-A/C 1968 Barracuda Convertible

I did this swap. I put factory air salvaged from a 71 dart in my 69 Barracuda. It was a LOT of work, but turned out nice. Both the donor car and mine were V8. This was a built in unit, not a knee knocker. A knee knocker would have been a lot easier.

I used the whole original set up, under dash box, hoses, brackets and all. The more complete set up you get, the better.

The firewall is different, so you will need some new mounting holes and will need to cut the fan hole out bigger.

You will need a new dash bezel to accommodate the ac push buttons, or modify the one you have.

You will need an ac under dash unit and controls.

if you get the ac brackets & pulleys for the motor, you will be way ahead.

I bought a new dryer, expansion valve, & condenser off eBay.

If you want more info, pm me.