I used a picture/ diagram that i was given to go by. Its suppose to be really close to the end of the Z bar but it didnt work for me. It hit the mini starter. So i cut it back off. I installed the Z bar hooked it all up including the adjustment rod. I held it in place & tack weld it. Took it all apart then welded it up. Not sure how guys are using the Z bars modified like TTI wants. It didnt line up with fork. Any ways mine has no clearance issues. I also made sure i didnt loose any length on that arm. So are you saying that the clutch fingers are not being pushed in fare enough ? I have heard of guys adding length to the clutch rod.
