318 missing and stalling once warmed up and at cruise
My buddy had a 360 (in his '65 A100 truck) that ran well until it warmed up (15-20 minutes). After lots of investigating I discovered the harness to the Electronic Ignition module had been pinched/smashed when the engine was installed (by the previous owner). I made/installed an overlay harness, to the module, and the problem was gone.
My buddy had a 360 (in his '65 A100 truck) that ran well until it warmed up (15-20 minutes). After lots of investigating I discovered the harness to the Electronic Ignition module had been pinched/smashed when the engine was installed (by the previous owner). I made/installed an overlay harness, to the module, and the problem was gone.
