Its me again lol

As a matter of fact if I remember correctly I didnt really touch the bowl too much other than to clean them up. I didnt cut all that much out just cleaning edges and obvious cast defects. I cut and polished the walls leaving the swirl wall alone other than cleaning and polishing. So the bowls are probably pretty close to the stock cc with maybe +1 or +2 cc over
Nice Man! It sounds like you did alot of your own work, that's a good Thang! There is alot of Great Guys here that are willing to help. I Can say, once 50 ideas start flying in, Be careful, change 1 thing at a time. I've also seen cases where sometimes the person try to take you on the slow and stable track will get upset because 80 other people are posting on the thread at the same time, when they just want a Baseline.... and I dig that man that's like finding the center of a giant building and pulling all your layout for your framing on it... if the framer the electrician and the plumber don't use the same Baseline and all the pipes are ran underground in the wrong place and then you come in and build your walls somebody's going to be cutting a lot of concrete to make up for that one.....