Fuse Blows!

I found it!

The fuse didn't blow when I put one in just now. Hmmm. It blew 3 the other day.

I tried jiggling the connector on the firewall that goes down to the neutral safety/reverse light switch while watching the b/u lights with a mirror. They flickered. Upon disconnecting the connector to inspect, I found one of the male spade connectors trying to "escape". As a result, the exposed connector had been touching the brake line that goes to the RF wheel.

Earlier this week, I had the trans pan down, and moved those wires away from the headers. Apparently, that's when connector and its exposed spade connector started touching the brake line.

Not blowing the fuse today was because I had the intake off after the trans pan job, and inadvertently jiggled those wires so they weren't touching the brake line.

I got lucky on this one! It was the first thing I checked!

Thanks for the ideas and suggestions.