Small Block Distributor Rotor Position
I have a Mopar Performance Electronic Ignition kit, part number P3690426, that I tried to install on my 70 340 Dart which has a single point distributor. I couldn't get the engine to run with the electronic distributor so I left the point distributor in. The point distributor has an oil leak so I wanted to see if replacing it solved the problem. When I had both distributors out I noticed the rotor and the tip that goes into the oil pump gear on the point distributor were parallel, however the rotor and oil pump gear tip on the electronic distributor are about 30 degrees off. See pictures. I found pictures of other small block distributors and they all have parallel rotors and oil pump gear tips Mopar 1973 340 Electronic Distributor A, B & E - body P/N 3656771 | eBay. Is there a way to adjust the shaft on my electronic distributor so the rotor and gear pump tip are parallel? I know I can adjust the oil pump gear to get the engine to run but I would rather adjust the electronic distributor so it would be interchangeable with the point distributor in case I would have to put it back in.
I have a Mopar Performance Electronic Ignition kit, part number P3690426, that I tried to install on my 70 340 Dart which has a single point distributor. I couldn't get the engine to run with the electronic distributor so I left the point distributor in. The point distributor has an oil leak so I wanted to see if replacing it solved the problem. When I had both distributors out I noticed the rotor and the tip that goes into the oil pump gear on the point distributor were parallel, however the rotor and oil pump gear tip on the electronic distributor are about 30 degrees off. See pictures. I found pictures of other small block distributors and they all have parallel rotors and oil pump gear tips Mopar 1973 340 Electronic Distributor A, B & E - body P/N 3656771 | eBay. Is there a way to adjust the shaft on my electronic distributor so the rotor and gear pump tip are parallel? I know I can adjust the oil pump gear to get the engine to run but I would rather adjust the electronic distributor so it would be interchangeable with the point distributor in case I would have to put it back in.
