More ignition issues on the dart

[1] The cct shown in post #76 is shown a lot & is not quite correct. If the coil you are using [ Chrys stock ] which used a bal res, then the res resistor must be retained. Any coil that uses a bal res must keep it to use that cct. If you used an E core coil such as MSD #8207 [ better, stronger spark ], then res is not needed.
[2] The p/up polarity is relative to rotor phasing & can cause cross firing if you get it wrong.
With the Chrys p/up, the black wire connects to the G [ green ] terminal of the HEI module.