This is where I'm at right now. I still need to do some polishing, this is carbide bit to knock the big stuff off, then sand paper wheel to smooth things out. This only took about 10-15 minutes per port. The biggest things I did was remove the pushrod bulge completely, removed the bumps on the sides of the guide ramp and thinned down the guide casting. I also improved the transition into the pocket on the right and left sides. Lastly, I cleaned up the pocket to get rid of the weird transitions from where the machined the casting for the seat.
View attachment 1716017229
View attachment 1716017228
View attachment 1716017230
View attachment 1716017231