Guess the HP

I installed the new rocker shaft, inspected the other shaft, it looked fine.
Then Installed the studs, also upgraded my brand new Smith bros 5/16 pushrods to Smith bros 3/8 pushrods because even though I have sft-hr spring pressures we did notice a bit of witness markings on those 5/16 pushrods.
I torqued the nuts to the studs at 28 ft lbs.
Reset all my lash at .018....ice freaking cold
**** I better check my notes on that.
Gotta do it over .018 is supposed to be hot.
On second thought for the sake of lash loops we'll run it and see if it likes it.
.013 will be hot