Adjustable upper control arm

cmac64dart said
Ok so I have an spc upper control arm with a disk brake conversion kit. Thing is... no matter how I adjust it doesn't want to mate up to the spindle properly. Is it something I have installed wrong or just the wrong uca which will suck because they weren't cheap and bought years ago. I do have a set of large ball joint uppers I can switch into. I thought these would assist with a good alignment for radial tires. Thanks

View attachment 1716017847

View attachment 1716017848

View attachment 1716017849

You have a ton of threads exposed on the adjusters on those arms. This is how my Gen I SPC’s look on my Duster with the alignment set. I do run a taller upper bumpstop because my car is lowered and I run 1.12” torsion bars. But you can see I’ve got less than a 1/2” of exposed threads on the adjusters

Demonic said
Whats the part # on those arms? SPC has a bunch of FAQ's listed by part #. Did you contact them? What year is your car? The A body application looks different than your pics.

View attachment 1716018232 97300 - Adjustable Upper Control Arms (pair)

You have the GenII SPC’s linked there. The OP has the Gen I’s.