Cam Selection 360
Sure have!
Guides were a touch loose, but nothing I'm going to worry about. Didn't use a significant amount of oil after I replaced the missing/broken/deteriorated valve seals a few years back
Valves before:
Cleaned up:
Lapped:
Also of interest, I replaced the cam bearings because I discovered this during the teardown:
Sure have!
Guides were a touch loose, but nothing I'm going to worry about. Didn't use a significant amount of oil after I replaced the missing/broken/deteriorated valve seals a few years back
Valves before:
Cleaned up:
Lapped:
Also of interest, I replaced the cam bearings because I discovered this during the teardown:
