Poor hot idle caused by ethanol gas? Whaddya think?
Install a return after the fuel pump as they did on all 80's mopars using a fuel filter with a return built in with an extra nipple on the side. You will have to run a 1/4 inch line back to the tank.
They sell a fuel pick up with a return outlet or you can use a awl and punch a hole in the tank at the top. Once you poke a hole make it larger using a tapered punch so the metal is bent inward to the size needed for a 1/8 pipe tap. Tap the hole just enough to get the 1/8 threaded barbed nipple started. You will now have a return liked used on all 80's model carbureted engines to deal with this issue .
I have done this to several cars with a fuel boiling problem.
Install a return after the fuel pump as they did on all 80's mopars using a fuel filter with a return built in with an extra nipple on the side. You will have to run a 1/4 inch line back to the tank.
They sell a fuel pick up with a return outlet or you can use a awl and punch a hole in the tank at the top. Once you poke a hole make it larger using a tapered punch so the metal is bent inward to the size needed for a 1/8 pipe tap. Tap the hole just enough to get the 1/8 threaded barbed nipple started. You will now have a return liked used on all 80's model carbureted engines to deal with this issue .
I have done this to several cars with a fuel boiling problem.
