David Vizard, Uncle Tony's garage, Unity motorsport. Mission impossible Dodge 302 Head porting

Welp... I HAVE a couple of stone stock 318s and I HAVE a couple of sets of 302s. That I don't have to go out and spend anything to acquire. I'm putting them together for that reason. And it's MY TIME spent to make them the best I can... I'm not at all trying to defend DV, or UT, I haven't even seen any of what you speak of... We don't have an Autobahn here, and I've never taken a car down a 1/4 mile, I'm building a couple of cars for ME, with what I have, the one that isn't totally blown apart in pieces runs pretty decent as a weekend cruiser as is, I just hope that by adding the cam I HAVE, and the heads I HAVE ALREADY, will make it a better cruiser.
If not, I'm not out much. It ain't gonna be any worse than it is now when done. And I'll learn from it.
Everyone doesn't need 300 degrees duration cams or exotic heads or 9 sec 1/4 mile times to have a cool cruiser that is rarely seen these days.... A "nice car" or " cool car" isn't the same to everyone.
I simply want to tweak out what I have and make it the best I can make it be, with what I have .. without starting from scratch with some engine and/or some heads that I don't have.and don't have the money to acquire.
Otherwise I can't afford to do anything with them to make them better than they are at present.
Whether I want to spend it or you want to spend it for me, I don't have any extra money to spend but I love older Mopar cars and trucks so it"s do what I can with what I have or don't do anything at all....

On the 360 heads to a 318, all that's gonna do is make a bigger turd than you started with because they rarely "CC out" to advertised CR, and bigger chambers will..... Wait for this...... Make a low CR even lower! Which sure ain't any good for performance. Most 360s even that spec out in any 70s/80s auto repair manual at 8.2 are most likely not even 8 to 1 stock either...... With tolerance stack up and such.
I'll take my chances with 302s and a mild cam on a 318.....