Spark at coil and distributor but no spark after plugs installed and crank at key
Positive side of coil OR 12v switched power source.
I saw that too and their images are a bit wonky. The one image I posted would be a correct way to hook it up.
They also showed an image of no ballast resistor with the feed to the protronix on the pis coil terminal but their instructions specifically say must use a ballast.
Positive side of coil OR 12v switched power source.
I saw that too and their images are a bit wonky. The one image I posted would be a correct way to hook it up.
They also showed an image of no ballast resistor with the feed to the protronix on the pis coil terminal but their instructions specifically say must use a ballast.
