Intellitronix A-body Dash Install Thread

I ran into issues on mine Im going back changing my power. I ran to battery per instructions 12 volt battery constant I then ran my accessory was working but had weird ground issue. It was not hooked up but was working in both on and assessory mode. Anyone got any pictures dart or Duster how they did the wires/dimmer indicator it's red so mine is hooked up along with blinkers temp and pressure. I did not use the light power or the blue yellow stripe. I made sure all matched up. It was working blinkers had power all that but something took unit out after I unhooked power and started on the sensor grounds.