63 Dart ignition issue

Update: checked the ballast resistor... Good. Checked ignition.... Good. Checked for 12v at the blue wire at ballast with key on... Nothing. Finally sat down and looked at the 66 schematic I printed and started ringing out wires. I pulled the upper bullhead connector and ring out the blue wire to ballast... Good. Then I look at the bulkhead plug and what do I see... The wire in the plug in the lower slot and the wire in the bulkhead in the upper. Total bonehead move. Oh well... Live and learn right? Lol.

Switched the plug wire from bottom to top and plugged it back in and... Success!!! Car runs with key released. Still have to set the valves and fill coolant, rear diff and bleed the brakes. But moving in the right direction. Can't wait to move the car under it's own power soon